How to Measure

All products are custom made to order and cannot be returned except for warranty approved repairs or replacements. For this reason it is essential that the area to be covered is measured correctly.

Use a good tape measure (metal ones are best) and measure down to the nearest mm. It is essential the measurements provided are accurate for the blinds to fit correctly.

Don't be surprised if your windows aren't perfectly square. Measure all windows, even if they appear to be the same size

Instructions with Photos

For more instructions please choose your type of blind from the list below:


Decide if you want your blinds installed within the window opening (Inside/Reveal/Recess Fit) or on your wall/architrave (Outside/Face Fit).

The most common fitting is Recess Fit (also known as Inside or Reveal Fit) for a neater look, but make sure you have enough depth to allow the product to fit and operate correctly.

Use a Face Fit if you want your blind to hang outside the window recess, or when the opening is too shallow or the window is significantly out of square.

Always take note of any obstructions to the blinds operation like handles, extrusions, storm bars or tiles and allow for their position.

Please take extra time to measure all of the windows/doors accurately and check the measurements twice.

All manufactured products are able to be fitted either inside or outside the window frame on the wall giving you complete control over the positioning of your blinds.